Battery operated App control GL09 GSM Alarm system SMS Alert Wireless alarm

Description

Battery operated App control GL09 GSM Alarm system SMS Alert Wireless alarm Home and industrial burglar security alarm
GL09 Eight channel Smart GSM SMS Alarm box Home security system
1. Totally compatible with GA09 gsm alarm box
2. Power supply voltage low alarm
3. Wide power voltage input from DC5V to DC16V
4. The GL09 is a battery operated GSM module used to send an alarm notification after a triggered input.
5. When the power input batteries need to be replaced, the GL09 sends a ‘low battery’ SMS text message to the first telephone number (administrator).
The battery low voltage limit can be preset by the user.
DC5V-16V Power input
SMS alarm message would be sent to maximum 6 preset mobile phones when any alarm input triggered
Any input (From S1 to S8) is shorted to GND,then will trigger the alarm
Alarm SMS can be customized with your Text
Very smart and slim designed gsm box , size only 66mm*62mm and only 22mm height.
can be easily mounted to other target system board to add the gsm alarm features.
We can customized design the GSM Alarm box according to your requirments with free of charge
Support Only SMS text alarm or Only phone calling alarm or Both alar
Totally 8 alarm input and every input can be defined as NO or NC type input
Every input can be Armed or Disarmed seperately with SMS comman
The GL09 is a battery operated GSM module used to send an alarm notification after a triggered input.
When the power input batteries need to be replaced, the GL09 sends a ‘low battery’
SMS text message to the first telephone number (administrator)
Packing list:
One pcs GL09 alarm box with antenna
​One pcs cable with connector
(No any sensor, no sim card, no battery included in the parcel )
​
GL09 Description:
Green terminal for DC5V-16V Power input
Q:What size is the GSM Card?
A:stand size phone card as the pictures show
This GL09 is just match the Standard card
(15 X 25mm)
,not match anyother size card.
AT&T
Alarm input map:
(Important note: All sensor must have the relay switch output,then can be connected to GL09 alarm input )
1. Battery are not included in the order packing list.You can select the DC5V to DC16V battery.
then you setup the alarm voltage limit, then when when the battery votage dropped below the limit,
then will send the alert SMS to the first SMS alarm number. then you can go to change the battery easily.
​2. When normal working,you can switch both DIP switch to ON postion,then device will go to "power-save"
working status, then only when alarm happen, it will go back to awake and send the alarm SMS.
This will save the battery greatly.
Track Page Views With
Auctiva's FREE Counter