AVTECH Light Tower w/Audio alerting capabilities 32W, 32E, 12E, 3E w LT-32-ADP

Description

The AVTECH Light Tower w/Audio is designed to enhance the alerting capabilities of the Room Alert 32W, 32E, 12E, 4E or 3E monitors to include visual and audible alarm when an issue or event occurs. The visual alarm warning lights and audio alerts can also be turned on or off automatically or manually via the Room Alert web interface, AVTECH's Device ManageR software and SNMP Trap or SNMP Set commands. Any Room Alert or Axis camera on the network can enable or disable the lights or audio. The light and audio tower does not need to be directly attached to that unit. This capability allows the Light Towers to be mounted in any location where the lights are highly visible and trigger from across the network. Lights can be activated by alarms detected by sensors connected or by other devices remotely across the network.
IMPORTANT! If you do not have the 4E then you also need the
LT-32-ADP in order to connect the item.  This listing includes the LT-32-ADP
The Light and Audio Tower is connected to the Room Alert 4E via the Light Tower Connection Port on the back of the Room Alert 4E monitor. Room Alert 32W, 32E, 12E and 3E monitors require a Light Tower & Relay Adapter (which includes a Relay Switch) in order to connect the Light Tower. The Light Tower w/Audio has an adjustable audio alarm with an intensity range of 0 dB to 95 dB (at 1m). It can be adjusted by simply unscrewing the cover or removing the center plug. The Light w/Audio tower comes standard with a 15' cable that connects via easy 'twist & click' connectors. It can be extended to just over 100' with AVTECH's 25´ Light Tower w/Audio Extension Cable ONLY.
External Light Tower  Yes, Red-Yellow-Green w/Audio
Oscillation Frequency 2.7 KHz +/- 50Hz (Max Intensity 95 dB @ 1m)
Adjustable Audio Yes
Mounting Bracket Yes, Compatible w/1U Rack, Wall or Other
Sensor Cable Type AVTECH Custom Cable
Sensor Cable Length 15' (Light Tower w/Audio Extension Cable Available)
Maximum Sensor Cable Length Approximately 100'
Compatible Products Room Alert 4E. Room Alert 32W, 32E, 12E, & 3E with Light Tower & Relay Adapter
LT-32-ADP
The AVTECH Light Tower & Relay Adapter is required to connect the Light Tower, Light Tower audible and visual alarm or the Relay Switch Sensor to AVTECH's Room Alert 32W, 32E, 12E or 3E environment monitors. It also includes one (1) relay switch that can be used to turn on/off low voltage devices via the Room Alert web interface, Device ManageR or automatically in response to an alarm condition going in or out of an alert stage. Common uses for this relay include connecting to a building alarm panel or other notification system to automate advanced alerting and response to static building alarms that do not notify staff. Users can also connect it to a generator, back up HVAC unit, fan or water pump to turn it on/off in response to an alert condition. The built-in relay supports loads up to 0.3A at 125VAC or 1A at 24VDC.
This is an instant 'Plug & Play' adapter that connects directly into the 'Light Tower / Relay' Port on the Room Alert 32W, 32E and 12E monitors, or the Room Alert 3E via the included 25´ RJ-11 Cable, and to a Light Tower or Relay Switch Sensor via a connection cable. Connect the relay by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable. The AVTECH Light Tower & Relay Adapter is ONLY compatible with AVTECH's Room Alert 32W, 32E, 12E and 3E at this time, or Relay Switch Sensor. A 5V 1A International Power Adapter is included that provides independent power to the attached devices.
Rest assured that sellcom.com is an authorized reseller of AVTECH products and that products purchased from us will be drop shipped direct from the factory and carry the full manufacturer warranty, Free Shipping is to US48 states ONLY!